2013-2018 Dodge / Ram 3500 Pickup w/ Rear Air-Base Kit Id 1647H
6" Lift Kit
BDS Suspension is now shipping suspension lifts and accessories for the rear air ride equipped RAM 3500 4WD trucks.
These standard kits are designed to retain the factory radius arms by relocating the frame mounting location using a pair of 1/4" steel drop brackets to maintain suspension geometry. The drop brackets key off the factory mounts and tie into the frame for extra strength. Also included in the kit...
6" Lift Kit
BDS Suspension is now shipping suspension lifts and accessories for the rear air ride equipped RAM 3500 4WD trucks.
These standard kits are designed to retain the factory radius arms by relocating the frame mounting location using a pair of 1/4" steel drop brackets to maintain suspension geometry. The drop brackets key off the factory mounts and tie into the frame for extra strength. Also included in the kit are specially designed 6" diesel engine specific progressive rate ProRide front coil springs offering improved performance across all terrains. Also included is a heavy duty front track bar bracket, forged drop pitman arm, extended bump stops, brake line relocation brackets, sway bar correction, high clearance transmission crossmember and transfer case indexing ring, rear block and u-bolt kit along with rear air bag lower spacers and sensor brackets. All kits are finished off with your choice of BDS NX2 or FOX 2.0 gas shocks at all 4 corners. These kits allow for up to 37" tires to be installed.
- Tire & Wheel Combinations
- 37x13.50 w/17x9/18x9/20x9 and 5.625" back spacing
- 37x12.50 w/17x9/18x9/20x9 and 4.5" back spacing
*Trimming may be required*
- Est. Installation: 6-7 hours
- Difficulty Level (easy 1 - 5 complicated): 3
Important Kit Notes
- Kits come standard with 6-Bolt indexing ring kit. If equipped with heavy-duty 8-bolt t-case order 122813 in place of 122623
- The carrier bearing drop (122405) is necessary for models equipped with two piece rear drive shaft.
- Some vehicles may require rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement
- Will NOT fit cab and chassis models
- The shocks used in these kits are different than a standard 3500, do not use a different shock length or damage to the air bag will result.
- Can be used on SRW or DRW models, DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6" kits
Base Kit Components 1647
These components are subject to change based upon your selections.
| Qty | Part# | Description |
|---|---|---|
| (1) | 012610 | 13 3500 Ram 6in Front Box Kit |
| (1) | 012618 | Ram 3500 Auto Level Air Suspension 6in R |
| (1) | 032602 | 13-18 Ram 3500 - 14-18 Ram 2500 6in Coil |
| (1) | 122623 | 13 3500/14 2500 Ram T-Case Index- 6 Bolt |
| (2) | 85752 | NX² Shock Absorber |
| (2) | 85769 | NX² Shock Absorber |
Compatible Vehicles
These vehicles also are compatible with this product.
Click on a vehicle to see other available kits.
| Make | Model | Type | Year Range |
|---|---|---|---|
| Dodge / Ram | 3500 Pickup | w/ Rear Air-Ride | 2013-2018 |
BDS Suspension Lift Kit Warranty
All BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".
If you are the original purchaser of any BDS lift kit and it breaks, we will give you a new part. Period.
Proposition 65 WARNING!
