2019 Dodge / Ram 1500 Rebel w/o Air-Ride Base Kit Id 1637H
6" IFS Lift Kit
2019 Dodge Ram 1500 4WD
This 6" system of BDS utilizes a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair...
6" IFS Lift Kit
2019 Dodge Ram 1500 4WD
This 6" system of BDS utilizes a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system to secure the front differential and keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Additional ride height on this particular kit comes from a set of top mounted steel fabricated strut spacers along with a preload spacers to maintain ride quality and handling characteristics. Rounding out the front of this kit are a pair of stainless steel braided extended brake line and sway bar relocation brackets.
In the rear of this 6" lift system the factory coil springs are replaced with 5" ProRide coil springs to level the stance. With the additional ride height the rear suspension geometry is corrected with control arm relocation brackets, a bolt-on rear track bar relocation bracket to recenter the axle, extended length sway bar links to correct operating angle, and bump stop extensions to properly limit up travel. The rear of these kits are rounded out with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compatibility and a 5year-100mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 RAM 1500 truck with this new 6" lift system from BDS Suspension.
- Tire & Wheel Combinations
- 37x12.50 w/17x9 and 4.5" back spacing
- 37x12.50 w/18x9/20x9 and 4.5-5" back spacing
*Trimming may be required*
- Est. Installation: 10 hours
- Difficulty Level (easy 1 - 5 complicated): 4
Important Kit Notes
- 1. RAMs with factory 22" wheels require the larger bore knuckles due to larger wheel bearing assembly. Reference build code WPM or WPZ
- 2. Will NOT fit adjustable "air ride" suspension equipped models
- 3. Will NOT fit 2019 RAM 1500 Classic models, Refer to the 2018 kit listings
- 4. Stock 17" wheels cannot be reinstalled to to steering interference. Stock 20s can be reinstalled with factory tire size
- 5. If installing the 6" kit on a Rebel or truck with an "off road group package" the truck will sit about 1/2" front high with the preload spacer installed. If the preload spacer is not installed the truck will sit about 3/8" nose low
- 6. This kit will NOT work on Diesel models.
- The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well.
Base Kit Components 1637
These components are subject to change based upon your selections.
|(1)||022508||2019 Ram 1500 Rear Box Kit|
|(1)||022632||2019-20 Ram 1500 Knuckle Box Kit - DRV|
|(1)||022633||2019-20 Ram 1500 Knuckle Box Kit - PASS|
|(1)||022634||2019 Ram 1500 Front Box Kit 1of2|
|(1)||022635||2019 Ram 1500 Front Box Kit 2of2|
|(1)||022636||2019 Ram 1500 6in Strut Spacer Box Kit|
|(1)||032508||2019 Ram 1500 5in Rear Coil Box Kit|
|(2)||85751||NX² Shock Absorber|
These vehicles also are compatible with this product.
Click on a vehicle to see other available kits.
|Dodge / Ram||1500 Pickup||w/o Air-Ride||6"||2019|
|Dodge / Ram||1500 Rebel||w/o Air-Ride||6"||2019|
BDS Suspension Lift Kit Warranty
All BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".